A client sent back a video last spring: the stamp head, clicked onto its handle, moves about 1.5 mm at the tip when you press. Not enough to see at a glance, enough to make a treatment uneven.
We looked at the head first, because that is what we make. It was within 0.03 mm on every dimension. Then we looked at the handle — a moulded part from a different supplier, matched to a thread spec of "M12-ish".
That is the problem. The thread between head and handle is usually described in words on a purchase order, not in numbers on a drawing. Two factories can both be "in spec" and still have 0.15 mm of play, which at 60 mm of lever arm becomes the wobble in the video.
The fix is boring: specify the thread with a go/no-go gauge, and make the head's internal thread the controlled dimension, because that is the part you can hold to tolerance more cheaply. If a supplier quotes you a head without ever asking about your handle, they have not understood the product yet.
Scan to chat on WhatsApp
Scan to add on WeChat